Skip to main content

There are also many PLC manufacturers in China, let’s make a comparison

 China has several local PLC manufacturers, such as Delta, Fatek, and Shihlin Electric, among others. Here is a comparison of these Chinese PLC brands with some popular international PLC brands:


  1. Delta: Delta is a popular Chinese PLC brand that is known for its cost-effectiveness and wide range of products. It offers a variety of PLC models, including the DVP-SS, DVP-SA, and DVP-SE series. Delta PLCs use a ladder logic programming language and are suitable for small to medium-sized automation projects. Delta PLCs are widely used in industries such as packaging, material handling, and textiles.
  2. Fatek: Fatek is another Chinese PLC brand that is known for its cost-effectiveness and user-friendly software. It offers a variety of PLC models, including the FBs series, FB series, and the FBs-PLC series. Fatek PLCs use a ladder logic programming language and are suitable for small to medium-sized automation projects. Fatek PLCs are widely used in industries such as packaging, food processing, and semiconductor manufacturing.
  3. Shihlin Electric: Shihlin Electric is a Chinese PLC brand that is known for its wide range of products and cost-effectiveness. It offers a variety of PLC models, including the SPS series and the SV series. Shihlin Electric PLCs use a ladder logic programming language and are suitable for small to medium-sized automation projects. Shihlin Electric PLCs are widely used in industries such as plastics, rubber, and textiles.
  4. Compared to international PLC brands such as Siemens, Allen Bradley, and Mitsubishi, Chinese PLC brands are generally more cost-effective, making them suitable for small to medium-sized automation projects. However, they may have fewer features and capabilities than some international brands, making them less suitable for larger and more complex automation projects.


Chinese PLC brands such as Delta, Fatek, and Shihlin Electric are generally more cost-effective than international PLC brands, making them suitable for small to medium-sized automation projects. However, they may have fewer features and capabilities than some international brands, making them less suitable for larger and more complex automation projects. It's essential to consider your project requirements and choose the appropriate PLC brand that matches your knowledge and experience in automation control technology.

Labels:

Comments

Post a Comment

Popular posts from this blog

Ferrules and Cross Ferruling

 Ferrules are identification labels provided for every wire terminations in an instrument, equipment, or electrical/instrumentation control panels. These tube-shaped sleeves can be inserted easily on each individual wire in a multi-core cable. In earlier days fixed digits/letters are used as ferrules, but now Instrumentation engineers/technicians prints out desired ferrules by using a ferrule printing machine. Typical Ferrule The numbers/ letters on the ferrules will be given as per the approved electrical hook up or loop diagrams. This helps technicians to easily identify a particular loop/wiring from a series of terminal blocks and to troubleshoot the desired terminal connection. Separate numbers on the ferrules distinguish the positive and negative polarities of wires, thus ensure the polarity protection of the instrument. Cross Ferruling  As a wire is connected on its both ends, it is quite useful to use a cross reference method for wire identification. Unlike normal ferru...
1 comment
Read more

PLC Program for Mixing Tank

 Create a ladder diagram for controlling a batch mixing process. Implement a PLC program for mixing tank or Mixing Process using PLC Ladder Logic. PLC Program for Mixing Tank Fig : Mixing tank A tank is used to mix two liquids. The required control circuit operates as follows: A. When the START button is pressed, solenoids A and B energize. This permits the two liquids to begin filling the tank. B. When the tank is filled, the float switch trips. This de-energizes solenoids A and B and starts the motor used to mix the liquids together. C. The motor is permitted to run for 1 minute. After 1 minute has elapsed, the motor turns off and solenoid C energizes to drain the tank. D. When the tank is empty, the float switch de- energizes solenoid C. E. A STOP button can be used to stop the process at any point. F. If the motor becomes overloaded, the action of the entire circuit will stop. G. Once the circuit has been energized, it will continue to operate until it is manually stopped. Solution...
2 comments
Read more

What is a Torbar? – Averaging Pitot Tubes

 The Torbar is employed for flow measurement of liquids, gases, or steam in circular, square, or rectangular section ducts for large flow rates. The Torbar is an insertion type multi-port self-averaging primary sensor for flow measurement. Torbar TORBAR is a set of Pitot tubes mounted on a bar across the pipeline with no moving parts. An averaging Pitot tube is a technology, while TORBAR is a manufacturing brand name. There are several brands available in the market with VERABAR, ANNUBAR, etc. Averaging Pitot Tube Principle Purpose Averaging Pitot tube can be employed when the average velocity of the flow profile, rather than the velocity in a specific point in the cross-section is desired. Averaging Pitot Tubes Principle It measures the differential pressure between the static pressure tap and the tap of full pressure of a stream. Thus such magnitude of differential pressure is directly proportional to the square of the flow rate. Working The TORBAR is designed in such a way that ...
7 comments
Read more