Skip to main content

PLC Programming

 Programming Languages

A program loaded into PLC systems in machine code, a sequence of binary code numbers to represent the program instructions.

Assembly language based on the use of mnemonics can be used, and a computer program called an assembler is used to translate the mnemonics into machine code.

High level Languages (C, BASIC, etc.) can be used.


Programming Devices

PLC can be reprogrammed through an appropriate programming device:

  • Programming Console
  • PC
  • Hand Programmer


Introduction to Ladder Logic

Ladder logic uses graphic symbols similar to relay schematic circuit diagrams.

Ladder diagram consists of two vertical lines representing the power rails. Circuits are connected as horizontal lines between these two verticals.


Ladder diagram features

 Power flows from left to right.

 Output on right side can not be connected directly with left side.

 Contact can not be placed on the right of output.

 Each rung contains one output at least.

 Each output can be used only once in the program.

 A particular input a/o output can appear in more than one rung of a ladder.

 The inputs a/o outputs are all identified by their addresses, the notation used depending on the PLC manufacturer.

Introduction to Statement list
Statement list is a programming language using mnemonic abbreviations of Boolean
logic operations. Boolean operations work on combination
of variables that are true or false.
A statement is an instruction or directive for the PLC.

Statement List Operations
* Load (LD) instruction.
* And (A) instruction.
* Or (O) instruction.
* Output (=) instruction.


Labels:

Comments

Post a Comment

Popular posts from this blog

What is a Torbar? – Averaging Pitot Tubes

 The Torbar is employed for flow measurement of liquids, gases, or steam in circular, square, or rectangular section ducts for large flow rates. The Torbar is an insertion type multi-port self-averaging primary sensor for flow measurement. Torbar TORBAR is a set of Pitot tubes mounted on a bar across the pipeline with no moving parts. An averaging Pitot tube is a technology, while TORBAR is a manufacturing brand name. There are several brands available in the market with VERABAR, ANNUBAR, etc. Averaging Pitot Tube Principle Purpose Averaging Pitot tube can be employed when the average velocity of the flow profile, rather than the velocity in a specific point in the cross-section is desired. Averaging Pitot Tubes Principle It measures the differential pressure between the static pressure tap and the tap of full pressure of a stream. Thus such magnitude of differential pressure is directly proportional to the square of the flow rate. Working The TORBAR is designed in such a way that ...
7 comments
Read more

Ferrules and Cross Ferruling

 Ferrules are identification labels provided for every wire terminations in an instrument, equipment, or electrical/instrumentation control panels. These tube-shaped sleeves can be inserted easily on each individual wire in a multi-core cable. In earlier days fixed digits/letters are used as ferrules, but now Instrumentation engineers/technicians prints out desired ferrules by using a ferrule printing machine. Typical Ferrule The numbers/ letters on the ferrules will be given as per the approved electrical hook up or loop diagrams. This helps technicians to easily identify a particular loop/wiring from a series of terminal blocks and to troubleshoot the desired terminal connection. Separate numbers on the ferrules distinguish the positive and negative polarities of wires, thus ensure the polarity protection of the instrument. Cross Ferruling  As a wire is connected on its both ends, it is quite useful to use a cross reference method for wire identification. Unlike normal ferru...
1 comment
Read more

Thermowell Insertion and Immersion Length

 The thermowell is the industrial housing for temperature elements like RTD or thermocouple or temperature gauges. Thermowell is directly exposed to process fluid/media. Inside the thermowell, element/gauge is installed. Thermowell transfers the heat to the temperature element. Depending upon the element type, the fluid temperature can be known. So Thermowell protects the temperature element against harsh conditions and process fluid. It enables removal of the temperature element for replacement, repair, or testing without affecting the process system. Generally, thermowells are provided with all-temperature Elements like RTD or Thermocouple or temperature gauge. A few exceptions would be bearing RTD, skin type thermocouple, air duct thermometer, etc where thermowell is not applicable / required. When the thermowell assembly is inserted into the pipe, it is subjected to vibration. This vibration is caused by vortices to be generated alternately on either side of the thermowell. The...
Post a Comment
Read more