Skip to main content

Multiphase Flow Meter Working Principle

What are Multiphase Flow Meters ?

Multiphase Flow Meters (MPFM) are devices used to measure the individual oil, water and gas flow rates in a multiphase flow. The term MPFM is used to define also the metering of wet gas streams (i.e. multiphase flow where the gas content is very high).


A multiphase flow meter is a device used to measure the individual phase flow rates of constituent phases in a given flow (for example in oil and gas industry) where oil, water and gas mixtures are initially co-mingled together during the oil production processes.


Multiphase Flow meter Principle

Magnetic resonance makes use of a fundamental property of atoms and in effect makes it possible to “count” hydrogen atoms. Since oil, gas and water all contain hydrogen atoms, multiphase flow can be measured using magnetic resonance.


For this purpose the fluids are magnetised and subsequently excited by radio frequency pulses. The hydrogen atoms respond to the pulses and send back echoes which are recorded.


The amplitude of the echoes and the rate at which they decay is used to calculate the flow rates. The difference in magnetic resonance properties allows making a distinction between the flowrates of oil, gas and water.

Conceptually, a magnetic resonance multiphase flow meter consists of three sequential steps:
1.Creating a net magnetization by aligning the magnetic moments of hydrogen atoms in an applied, constant magnetic field.
2.Perturbing the alignment of hydrogen atoms by employing electro-magnetic radio frequency (RF) pulses.
3.Detecting the radio-frequency signal emitted by the hydrogen atoms during their return to equilibrium alignment in the external magnetic field
This measurement principle also forms the basis of magnetic resonance based flow metering.

Advantages of Multiphase Flow meters

Multiphase Flow Meters (MPFM)s are recognized to provide a number of additional benefits to O&G production:


Production allocation metering :

MPFM can be employed to reconcile oil, gas and water measurement at all entry and exit points of a production network, minimizing potential serious economic consequences in terms of taxes and custody transfer due to incorrect allocation;


Fiscal or Custody transfer :

when a single processing facility is shared by different producers, MPFMs can be used to meter the production from each license owner;


Production Optimization :

Multiphase flowmeters are able to deliver real-time, continuous data concerning production of the different phases; therefore they can be very useful for reservoir management and for optimization of the production;


Flow Assurance :

The continuous measurement from MPFMs provide further information to detect potential issues in the production system.


Applications of Multiphase Flow meter

Multiphase streams are typical of the O&G fields, since the producing wells normally generate mixture of liquid and gaseous hydrocarbons with a variable quantity of water. Knowing single rates of gas liquid and water is crucial for the production industry in order to monitor the reservoir, to improve the well performances and to optimize the production.


The traditional solution is represented by the test separators, large vessels where the different phases are divided and then measured through standard singlephase techniques. However, MPFM are becoming more and more appealing to the O&G Upstream industry, proving as a valuable alternative to the test separators.

 

Labels:

Comments

Post a Comment

Popular posts from this blog

PLC Program for Mixing Tank

 Create a ladder diagram for controlling a batch mixing process. Implement a PLC program for mixing tank or Mixing Process using PLC Ladder Logic. PLC Program for Mixing Tank Fig : Mixing tank A tank is used to mix two liquids. The required control circuit operates as follows: A. When the START button is pressed, solenoids A and B energize. This permits the two liquids to begin filling the tank. B. When the tank is filled, the float switch trips. This de-energizes solenoids A and B and starts the motor used to mix the liquids together. C. The motor is permitted to run for 1 minute. After 1 minute has elapsed, the motor turns off and solenoid C energizes to drain the tank. D. When the tank is empty, the float switch de- energizes solenoid C. E. A STOP button can be used to stop the process at any point. F. If the motor becomes overloaded, the action of the entire circuit will stop. G. Once the circuit has been energized, it will continue to operate until it is manually stopped. Solution...
2 comments
Read more

Ferrules and Cross Ferruling

 Ferrules are identification labels provided for every wire terminations in an instrument, equipment, or electrical/instrumentation control panels. These tube-shaped sleeves can be inserted easily on each individual wire in a multi-core cable. In earlier days fixed digits/letters are used as ferrules, but now Instrumentation engineers/technicians prints out desired ferrules by using a ferrule printing machine. Typical Ferrule The numbers/ letters on the ferrules will be given as per the approved electrical hook up or loop diagrams. This helps technicians to easily identify a particular loop/wiring from a series of terminal blocks and to troubleshoot the desired terminal connection. Separate numbers on the ferrules distinguish the positive and negative polarities of wires, thus ensure the polarity protection of the instrument. Cross Ferruling  As a wire is connected on its both ends, it is quite useful to use a cross reference method for wire identification. Unlike normal ferru...
1 comment
Read more

What is Relay? How it Works? Types, Applications, Testing

 We use relays for a wide range of applications such as home automation, cars and bikes (automobiles), industrial applications, DIY Projects, test and measurement equipment, and many more. But what is Relay? How a Relay Works? What are the Applications of Relays? Let us explore more about relays in this guide. What is a Relay? A Relay is a simple electromechanical switch. While we use normal switches to close or open a circuit manually, a Relay is also a switch that connects or disconnects two circuits. But instead of a manual operation, a relay uses an electrical signal to control an electromagnet, which in turn connects or disconnects another circuit. Relays can be of different types like electromechanical, solid state. Electromechanical relays are frequently used. Let us see the internal parts of this relay before knowing about it working. Although many different types of relay were present, their working is same. Every electromechanical relay consists of an consists of an Elect...
1 comment
Read more